Husqvarna TE 250 Meo Replica 
| Make Model | Husqvarna TE 250 Meo Replica | | Year | 2012 | | Engine | Liquid cooled, four stroke, single cylinder, DOHC, 4 valves per cylinder. | | Capacity | 249 | | Bore x Stroke | 76 x 55 mm | | Compression Ratio | 12.9;1 | | Induction | Electronic Fuel Injection | | Ignition / Starting | C.D.I. electronic, with variable advance (digital control) / electric and kick | | Spark plug type | NGK CR 8EB | | Spark plug gap | 0.7 mm | | Clutch | Transmission: Wet | | Max Power | | | Max Torque | | | Transmission / Drive | 6 Speed / chain | | Gear Ratio | 1st: 28,205 2nd: 22,721 3rd: 18,803 4th: 15,329 5th: 12,974 6th: 11,491 | | Frame | Steel single tube cradle (round, rectangular and ellipsoidal tubes); rear frame in light alloy | | Front Suspension | Marzocchi USD telescopic hydraulic fork with advanced axle compression and rebound stroke adjustment Fork leg diameter 48mm 300 mm fork travel | | Rear Suspension | Sachs Progressive Soft Damp type with single hydraulic shock absorber, spring pre-load adjustment. Compression and rebound adjustment (compression stroke - double adjustment)
296 mm rear wheel travel | | Front Brakes | Single 260mm “BREMBO”, fixed disc type with hydraulic control and floating caliper | | Rear Brakes | Single 240mm “BREMBO”, floating disc | | Front Tyre | 90/90-21 | | Rear Tyre | 120/80-18 | | Seat Height | 909 mm / 35.8 in | | Dry-Weight | 107 kg | | Fuel Capacity | 7.2Litresl / 1.9 gal. | 
The Husqvarna TE 250 has won the world title in the Enduro class E1, with Antoine Meo in the saddle. The championship was dominated by the Frenchman, who won eight out of the 16 day trials. The TE 250 Meo Replica adopts all the technical modifications that have been tried, tested and awarded laurels during the championship season. A racing bike available only in a limited edition of 100, for an exclusive group of connoisseurs and collectors. The look features all the "race replica" graphic design used by Meo - on front and rear mudguards, front fork, swing arm, reg. plate holder and radiator guards. The exhaust system has been designed by LeoVince, in collaboration with the CH racing team. It is entirely made of titanium with muffler skid plate and carbon fibre heat shield protector. In terms of mechanics, the Kayaba forks with close cartridge, (same forks as MX Husqvarna models) are mounted in machined-from-solid triple clamps with adjustable offset. The aluminium footrests are also machined-from-solid, and wider, allowing greater support surface for the foot. The engine and chassis undercarriage are protected by a sturdy aluminium sump guard, particularly useful in extreme Enduro events.
The bike has numerous special features, such as the aluminium oil filler with O-ring, fuel tank cap made of ergal, Selle Dalla Valle saddle with non-slide upholstery, and hand guards. Husqvarna TE250 Meo Replica Features and Benefits The perfect reproduction of the victorious bike ridden by Antoine Meo. Only 100 units available. To ride the legend “Antoine Meo” Racing Stickers Kit
Leo Vince Titanium Exhaust System with Carbon Heat protection and carbon end cap
Front Forks with Twin Chamber Closed Cartridge
Cnc Triple clamps
Cnc foot steps with wider section
Aluminium skid plate
Aluminium fuel tank cap
Aluminium engine oil cap
Dalla Valle seat with non-slide cover
Handle bar protection |
