Husaberg FE 650e

Husaberg FS 650e

 

 

 

 

Make Model

Husaberg FS 650e

Year

2008

Engine

Liquid cooled, four stroke, single cylinder, OHC, 4 valves per cylinder.

Capacity

644
Bore x Stroke 100 x 82 mm
Compression Ratio 11.8:1

Induction

Keihin MX FCR 41 TPS

Ignition  /  Starting

Kokusan digital  /  electric & kick

Max Power

Max Torque

Clutch Wet multiplate clutch

Transmission  /  Drive

6 Speed  /  chain
Frame Magura SX Alu conified

Front Suspension

WP USD 4860 MA Husaberg Enduro, 275mm wheel travel

Rear Suspension

WP PDS 5018 MCC Husaberg Enduro, 288mm wheel travel

Front Brakes

Single 310mm disc 4 piston caliper

Rear Brakes

Single 220mm disc 1 piston caliper

Front Tyre

120/60 -17

Rear Tyre

150/60 -17
Seat Height 780 mm  /  34.3 in

Dry Weight

112 kg  /  246.9 lb

Fuel Capacity 

10.5 Litres
  /  2.8 gal

 

Shock absorber- Updated setting and new spring colour in classic Husaberg-Yellow. For all models 2008.

Frame- Completely reworked frame-welding fixture used for all models 2008 with some new attachments points (e.g. silencer more spaced out to give better room for rear wheel).

Counter Balancer- A new type of counter balancer installed on all models of 2008. One-piece unit with a new type of bearing for longer duration.

Gearbox Stop-discs- Stop-discs in the gearbox with a new, higher collar for increased projection. To make the gearbox more durable against hard force on shifter. For all models of the 2008 series.

Water Pump Sealing- New type of material installed for the water pump seal with improved sealing function. For all models 2008.

Crankacase- In addition all 550cc models with a new type of crankcase in the area of the main bearings by concentrated reinforcement of the material around the bearings.

Crankshaft- Crankshaft with further improved tolerance values for maximum service life on models of the 2008 series.

Stickers & Decals- This years Supermoto has received a more dark appearance that emphasizes the feeling of the well known strong and light Husaberg Supermotos. The Enduro model have a sharper appearance with more distinguished lines in the graphics in combination with exclusive details. This is a pure racer!

Pre-load Adjuster- The WP pre-load adjuster offering additional individual tuning options on all 2008 models.

Steering Stem- Steering stem of the stronger aluminium type 2007.

Front Fork- new 12 mm coated aluminium piston rod instead of 14 mm steel and updated suspension settings for less friction and less weight on all models.

Triple Clamp- Exclusive CNC machined triple clamp on all 2008 models now including Enduro. The triple clamp is stronger and offers the adjustable offset function.

Front Brake Supermoto- Supermoto front brake master cylinder with a new type of adjustment of the pressure point. The position of the adjustment is changed.