Husqvarna TE 310ie Make Model | Husqvarna TE 310ie | Year | 2010-11 | Engine | Liquid cooled, four stroke, single cylinder, DOHC, 4 valves per cylinder. | Capacity | 297 | Bore x Stroke | 83 x 55 mm | Compression Ratio | 12.9;1 | Induction | Electronic injection MIKUNI D42 | Ignition / Starting | CDI. electronic, with variable advance (digital control) / electric and kick | Clutch | Wet, multiplate type; hydraulic control | Max Power | | Max Torque | | Transmission / Drive | 6 Speed / chain | Gear Ratio | 1st 2.000 (28/14), 2nd 1.611 (29/18), 3rd 1.333 (24/18), 4th 1.086 (25/23), 5th 0.920 (23/25), 6th 0.814 (22/27) | Frame | Steel single tube cradle (round, rectangular and ellipsoidal tubes); rear frame in light alloy | Front Suspension | 50mm Marzocchi “Upside-Down” telescopic hydraulic fork with advanced axle; compression and rebound stroke adjustment | Rear Suspension | Sachs shock absorber Progressive “Soft Damp” type with single hydraulic shock absorber; spring preload adjustment, compression and rebound adjustment (compression stroke: double adjustment), 296mm wheel travel. | Front Brakes | Single 260mm “BREMBO”, fixed disc type with hydraulic control and floating caliper | Rear Brakes | Single 240mm “BREMBO”, floating disc | Front Tyre | 90/90-21 | Rear Tyre | 120/80-18 | Seat Height | 963mm / 37.91 in | Dry Weight | 107 kg | Fuel Capacity | 7.2Litres l / 1.9 gal. | The new TE310 boasts the lightest engine in the 250 cc 4-stroke category (22 kg), boosted to 302.44 cc, thanks to an increase in bore and stroke, now 82 X 57.3 mm.
The throttle body is the same as that on the TC250 - a Mikuni 45 mm diameter. The exhaust system is specially designed for the 310 model and as in the other models has a new heat protection on the silencer.
The bike is much lighter than the previous version (- 6 kg) and comes with significantly higher torque and power.
Otherwise the bike has the same features as the TE250, with the new reinforced chassis, new Grimeca hubs, Kayaba 48 mm front forks and Sachs shock absorber with new settings, 8.5 litre fuel tank, new handguards and new bodywork graphics.
PRINCIPAL CHANGES TO TE250, TE310 AND TC250 MODELS " NEW CHASSIS, REDESIGNED AND REINFORCED " NEW HUBS " NEW GRAPHICS " NEW ENGINE GUARDS " WATERPROOF SPARK PLUG COVER " NEW EXHAUST PIPE HEAT PROTECTOR " ENGINE CRANK-CASE WITH STEEL CHASSIS SOCKETS
TE310 ONLY (NEW BIKE) " NEW ENGINE " NEW FRAME ( AS TE250) " NEW CDI WITH 2 MAPS SELECTABLE FROM A SWITCH ON THE HANDLEBAR KG.106 WITHOUT FUEL |