BSA Star Twin
|
|
Make Model | BSA Star Twin / Royal Star |
Year | 1962 - 72 |
Engine | OHV Parallel twin |
Capacity | 654 cc / 39.9 cub in. |
Bore x Stroke | 75 x 74 mm |
Carburetor | Amal monobloc 389/67 |
Cooling System | Air cooled |
Compression Ratio | 8.0:1 |
Lubrication | Dry sump |
Engine Oil | SAE 20W/50 |
Oil Capacity | 3 L / 5 pints / 0.79 US gal |
Exhaust | Twin, stainless steel |
Ignition | Twin coil |
Spark Plug | Champion N4, 0.5 mm / 0.02 in gap, 14 mm dia thread, 19 mm reach |
Battery | Prior 1966: 6V, 13 AH, Lucas RM19 alternator Post 1966: 12V, 9 AH, Lucas RM19 Alternator |
Starting | Kick start |
Max Power | 40 kW / 54 hp @ 4500 rpm |
Clutch | Multi-plate with bult-in cush drive |
Transmission | 4 Speed |
Final Drive | Chain |
Gear Ratio | 1st 11.49 / 2nd 7.32 / 3rd 5.24 / 4th 4.58:1 |
Frame | Steel tubing, cradle |
Front Suspension | Telescopic forks with coil spring - hydraulically damped |
Rear Suspension | Coil spring/hydraulically damped |
Front Brakes | 20.32 cm / 8 in., drum |
Rear Brakes | 17.78 cm / 7In., drum |
Wheels | Steel, wire spokes |
Front Rim | WM2-18 |
Rear Rim | WM2-18 |
Front Tyre | 3.25 x 18 in., ribbed |
Rear Tyre | 3.50 x 18 in., K70 |
Dimensions | Length: 2060 mm / 81.0 in. Width: 711 mm / 28.0 in. Height: 1010 mm / 39.8 in. |
Wheelbase | 1372 mm / 54.0 in. |
Ground Clearance | 178 mm / 7.0 in. |
Seat Height | 813 mm / 32 in. |
Wet Weight | 176 kg / 390 lbs |
Fuel Capacity | Europe:18 L / 4.8 US gal US: 9 L / 2.4 US gal |
Average Consumption | 4.7 L/100 km / 21.3 km/l / 50 mpg |
Top Speed | 160 km/h / 100 mph |
Colours | Blue, Ruby red |
Review | Wikipedia, Classic and Race Bike |
The big news from BSA came in 1962, with the arrival of new unit-construction engines, available in the 500cc BSA A50 or the bored-out 650cc BSA A65. In England these were known as Star models, whereas in the U.S. they were called Royal Star. Curious that, since we Americans had fought a bloody revolutionary war to get rid of the monarchy, and now we appeared captivated by anything that smacked of royalty.
The BSA A65 Star was a Birmingham Small Arms Company (BSA) motorcycle aimed at the US market for unit construction twins. As well as giving a clean look to the engine, with the pushrod passages part of the cylinder block casting, unit construction reduced the number of places oil could leak from. A range of A65 Star twins was produced between 1962 and 1972.
The decision by Lucas in the late 1950s to switch production of motorcycle electrical components (from magneto/dynamo systems to alternators/coil systems) forced British motorcycle manufacturers to completely redesign their engines. Triumph and BSA took the opportunity to move from pre-unit and semi-unit construction to full unit construction, that is, with the engine and gearbox together in an integrated casting. At the same time, Bob Fearon, managing director and general manager of BSA, recognised the need for a new look that built on the best features of the A10s but would succeed in the potentially lucrative, but competitive, US market. Working with chief development engineer Bert Perrigo, he developed the unit construction Star twins.
A range of these 650 cc (40 cu in) Star twins were produced between 1962 and 1972 but they were really developments of the old model range with less weight. Not enough time was spent on testing and development as BSA were struggling to remain competitive with Triumph models and the emerging Japanese motorcycles. Large side panels were fitted to cover the space behind the engine but they contributed to a dated look. This was reinforced by engine vibration, but acceleration was good to a top speed of 100 miles per hour (160 km/h).
BSA Spitfire
Twelve volt electrics were introduced in 1966 and the top of the range BSA Spitfire was capable of 120 mph (190 km/h). In 1967 BSA won a special Queens Award to Industry and by 1969 the BSA factory were responsible for 80% of the British motorcycles exported. In the US the 650 Star twins were selling well with styling changes including high rise handlebars and more streamlined fuel tanks. In 1970 a new 'oil in frame' design was adopted but this proved unpopular with shorter riders, as it increased the seat height. This was sorted out by 1972 but by then BSA were facing serious financial problems and stopped production of the outdated 650 Star twin.
When you are riding a machine that looks as good as this you feel rather special. I am biased because I love the styling of the late Sixties BSA 650 unit twins. They have a boldness and glamour that captures the spirit of the period. All British twins of the Sixties have that something, the BSA especially so. The machine we rode is a US spec 1968 MkIV Spitfire with a two gallon tank. The glass fibre tank looks good, but in my opinion the UK version looks better and it holds a whole lot more fuel. Running out of petrol while riding this model came as a bit of a surprise, and reminded me that a decent fuel range tank is rather sensible. Our test example was kindly loaned by Bill Crosby of Reg Allen Motorcycles, who also runs the London Motorcycle Museum. The Beeza had stood in the museum for months and looked as though it could do with a little polishing but was basically in good fettle. Tickle the carbs and it fired right away on two, sounding the part. Clutch and gearbox were fine and 60mph cruising was a high, wide and handsome experience. But there was a hole in the power delivery, effectively giving two stages of performance. For fast riding it was necessary to wait for the machine to get through the hole before it took off again. So 80mph-plus speeds involved a delivery hiatus, and my guess is that to get to three figures would take some time. Some work on the carburettors would no doubt reap dividends. On this score some period road tests only just scraped 100mph for the twin carb Lightning, while the Spitfire, equipped with bigger carburettors and higher compression pistons, performing slightly better.
|